VIBE Controller on stage

VIBE

Tap a pattern, pick a color, plug in DMX — your moving heads are live in seconds.

A compact, standalone DMX controller for moving-head stage lighting. No laptop, no lighting console, no software required — everything runs on a 3.5" touchscreen the size of a deck of cards.

Key Features

VIBE Controller on desk

🔄 4 Built-In Movement Patterns

Circle, Figure-8, Sweep, and Wander — each with adjustable speed, range, and phase spread across multiple fixtures for rich, automated movement.

🎯 Aim Control

Independent pan/tilt offset sliders let you shift the movement origin for every fixture without reprogramming — fine-tune placement on the fly.

📚 Fixture Library

Preloaded with 410 factory profiles across 25 manufacturers — ADJ, Chauvet, Elation, Martin, Robe, Clay Paky, and more. Plug in and control without building a patch from scratch.

Profiles are community-maintained. Always verify fixture response before a live show.

View all supported fixtures →

🛠️ Custom Fixture Profiles

Full DMX channel editor for any fixture not in the library. Supports RGB wash, LED moving heads with color wheel/gobo, and traditional HID discharge fixtures.

🎨 3 Color Modes

Solid color across all fixtures, Alternate (two-color split across fixtures), or Chase — switch modes instantly from the touchscreen.

⬛ HID-Safe Blackout

One-tap full blackout that keeps HID lamp arcs struck during the blackout, protecting your discharge fixtures from thermal stress.

💡 Lamp Strike Control

Toggle lamp strike on/off for HID discharge fixtures directly from the controller — no need to reach for the fixture or a secondary console.

⚡ Auto-Patch

Up to 4 fixtures fully auto-patched from a configurable start channel. No manual address math — VIBE handles it.

🎨 6 UI Themes

VIBE, Ultraviolet, Hi-Contrast, Classic Red, Ocean, and Sunset. Adjust screen brightness and auto-dim timeout for battery-friendly operation.

💾 Persistent Settings

Everything saves to flash memory. VIBE picks up exactly where you left off the moment you power it on.

Technical Specifications

VIBE Controller in planetarium environment

Display & Input

  • Display: 3.5" IPS Capacitive Touchscreen
  • Resolution: 480 × 320
  • Interface: Full touchscreen — no physical buttons required

Control & Output

  • DMX Output: DMX512 (3-pin XLR)
  • Fixture Capacity: Up to 4 moving heads
  • Patching: Auto-patch from configurable start channel
  • Movement Patterns: Circle, Figure-8, Sweep, Wander
  • Color Modes: Solid, Alternate, Chase

Fixture Support

  • Library: 410 factory profiles across 25 manufacturers — view full fixture list
  • Custom Profiles: Full DMX channel editor
  • Fixture Types: RGB wash, LED with color wheel/gobo, HID discharge/halogen

System

  • Processor: ESP32-S3
  • Storage: Flash memory (persistent settings)
  • UI Themes: 6 (VIBE, Ultraviolet, Hi-Contrast, Classic Red, Ocean, Sunset)
  • Screen Timeout: Adjustable auto-dim

Power

  • Power Input: USB-C

Perfect For

🎤 Live Events

Set up automated moving-head looks for concerts, corporate events, and live shows without a full lighting console or operator.

🏠 Permanent Installations

Install VIBE as a self-contained controller in bars, clubs, or event spaces where simplicity and reliability matter more than console complexity.

🎪 Touring & Rental

Compact enough to throw in a road case, powerful enough to run your rig. Auto-patch and preloaded profiles mean fast turnarounds between shows.

🎓 Education & Training

Teach DMX concepts and moving-head operation without the overhead of a full console. Accessible touchscreen UI gets students controlling real fixtures immediately.

Ready to Take Control?

VIBE is currently in development. Sign up for updates on availability.

Get Notified